How to operate the steel strip granulator normally

According to the physical properties and usage requirements, the steel strip granulator can choose intermittent drip addition, continuous strip unloading, and full width overflow to produce hemispherical, strip, and sheet products, respectively. How to ensure the normal operation of this equipment?
When operating the main machine of the granulator, a dedicated person should be assigned to record the files in detail in order to prevent machine malfunctions; Reference maintenance
2. The main machine of the steel strip granulator should be equipped with pressure sensors and digital displays to facilitate operators to check whether the main machine speed is normal;
3. The lubricating oil pressure gauge at the rear of the main machine of the steel strip granulator should be regularly checked to protect the abnormal operation of the transmission gearbox gears;
There is an electrical connection between the main engine and the oil pump motor, which means that if the oil pump motor does not start, the main motor cannot start; Motor, no parking allowed, oil pump motor, no parking allowed.
The steel strip and distributor of the steel strip granulator adopt variable frequency speed regulation, which can be conveniently adjusted and controlled according to production capacity and physical performance. Adopting temperature control to ensure stable and reliable operation of the system. Due to the reverse bending of the steel strip at the unloading end, the bonding surface between the solidified material and the steel strip separates, resulting in minimal dust during unloading and complete protection of particle shape.
The steel belt granulator uses thin steel belt for heat transfer and forced spray freezing to rapidly solidify the hot melt materials. I hope the above content is helpful to you.
Editor: Nancy