Precautions before starting the blown film machine

Now, under the new development situation, the existing high energy consumption and high pollution production methods are difficult to maintain. If the blown film machine market cannot optimize its industrial structure and carry out technological innovation and development with the development of the market, it will only be eliminated by the market. The following are precautions before starting the blown film machine.
1. Check whether the installation of the unit is carried out according to the requirements and whether the bolts are tightened properly.
2. Check and add lubricating oil to the reducer and air compressor, and inspect the lubrication of the transmission components of the blown film machine.
3. Check the power supply and electrical components, and ensure that all parts are not dangerously grounded.
4. If the gas cylinder is not filled with plastic and the temperature does not meet the requirements, it is strictly prohibited to start.
5. Check that there are no foreign objects in the cutting material, and that there are no iron filings or other unqualified materials mixed in with the raw materials.
6. The material should be dry, otherwise it should be pre dried.
7. Check if the heating system and temperature measurement system of the blown film machine are intact.
8. When starting, unrelated personnel should leave to prevent local overheating and burning of materials, prevent damage to belts and mixing drums, and prevent hair and clothing from getting tangled.
The above are the precautions for the blown film machine before starting up. We must check it before starting up to avoid dangerous accidents.
Editor: Miranda